Joint Simulator Kit

callibration equipment ExpertTorqueJointKitp001l

callibration equipment STATIONARYWSIMULATORl

Expert Joint Simulator kits are used to simulate various joint conditions in the tool crib or laboratory away from the actual joint. The Simulator joint rate can be easily changed to emulate different joint conditions from hard to soft.

Request a Quote Request Service, Parts or Support

Rotary Joint Simulator kits (JKRxxx)

1.0 to 500 Nm (1.1 to 370 ft-lbs)
Compatible with Smart and Industry Standard Rotary Transducers

Stationary Joint Simulator kits (JKSxxx)

1.5 to 1,000 Nm (1.1 to 738 ft-lbs)
Compatible with Smart and Industry Standard Stationary Transducers
JKST models come with Industry Standard Stationary Transducers

ModelName	Torque Range (ft.-lb.)	Torque Range (Nm)	Drive	Includes Transducer	Style
JKR180	6.7 - 133	9.0 - 180	1/2" Square	No	Rotary
JKR20	0.75 - 15	1.0 - 20	1/4" Square	No	Rotary
JKR500	18.5 - 370	25.0 - 500	3/4" Square	No	Rotary
JKR75	2.8 - 55	3.8 - 75	3/8" Square	No	Rotary
JKS1000	37.0 - 738	50.0 - 1	000	3/4" Square	No
JKS150	5.5 - 110	7.5 - 150	3/8" Square	No	Stationary
JKS30	1.1 - 22	1.5 - 30	1/4" Square	No	Stationary
JKS300	11.0 - 221	15.0 - 300	1/2" Square	No	Stationary
JKST1000	37.0 - 738	50.0 - 1	000	3/4" Square	TS1000S12
JKST150	5.5 - 110	7.5 - 150	3/8" Square	TS150S6	Stationary
JKST30	1.1 - 22	1.5 - 30	1/4" Square	TS30S4	Stationary
JKST300	11.0 - 221	15.0 - 300	1/2" Square	TS300S8	Stationary