W9000 Series IQV20™ 1" High Torque Cordless Impact Wrenches

With its quick setup and no hoses to trip over, the heavy-duty W9491 & W9691 1” cordless impact wrench promotes better safety and efficiency. Ingersoll Rand innovation ensures balanced weight, ergonomic D-handle with 360-degree auxiliary handle, and protected IQV®20 battery configuration with power for a full day’s work.

Power
With the Ingersoll Rand 1” cordless impact wrench, you will always have up to 3,000 ft-lbs ready to power and under control.

• Up to 3,000 ft-lbs of Nut Busting Torque and 2,200 ft-lbs of tightening torque
• Four power control modes with two featuring automatic shut-off (at 180 & 400 ft-lbs of fastening torque)
• Integrated Power Control System includes two modes which will stop the tool in SNUG or MID-POWER close the set values listed above

Productivity
Reduce setup time up to 15% compared to air tool setups, to get more jobs done in a day. Improve productivity and comfort for your operators with no air hose to carry and plug.

• 4 power control modes with 2 featuring automatic shut-off at approx. 180 & 400 ft-lbs
• High torque impact wrench battery leverages existing IQV®20 battery platform with enough power for a full day of work
• Provides superior ergonomics - Both batteries are nestled into the frame of the tool making it less cumbersome to handle

Durability

• IP56-rated for use in tough environmental conditions such as fleet truck maintenance, oil & gas, power generation, and rail industries. That means this battery-powered impact wrench is protected from dust and particles in the air as well as powerful jets of water. That means this battery-powered impact wrench is protected from dust and particles in the air as well as powerful jets of water
• Impact- and chemical-resistant composite housing stands up to almost all fluids found in maintenance shops or on job sites

Capacity

• Up to 250 bolts per charge - Sufficient capacity to tackle all the nuts and bolts in a full day’s work
• Lowers overall cost of ownership by leveraging your existing battery stock - The W9491 & W9691 uses the same 20V lithium-ion battery used across Ingersoll Rand’s entire line of IQV®20 cordless tools
• Version with 6" extended provides better access in recessed areas and hard to reach applications

Warranty
Backed by a 3-year limited warranty on tools and chargers. Click the graphic below for additional details.

Available in the Following Kits:

1. W9491-K2E: Standard Anvil Tool, (2) BL2022 5.0Ah Battery, Dual Bay charger

2. W9691-K2E: 6" Extended Anvil Tool, (2) BL2022 5.0Ah Battery, Dual Bay charger

3. W9491-K4E: Standard Anvil Tool, (4) BL2022 5.0Ah Battery, Dual Bay charger

4. W9691-K4E: 6" Extended Anvil Tool, (4) BL2022 5.0Ah Battery, Dual Bay charger